Electrically Switchable Polymer Brushes for Protein Capture and Release in Biological Environments.

Interfaces functionalized with polymers are known for providing excellent resistance towards biomolecular adsorption and for their ability to bind high amounts of protein while preserving their structure. However, making an interface that switches between these two states has proven challenging and concepts to date rely on changes in the physiochemical environment, which is static in biological systems. Here we present the first interface that can be electrically switched between a high-capacity (>1 µg cm-2 ) multilayer protein binding state and a completely non-fouling state (no detectable adsorption). Switching is possible over multiple cycles without any regeneration. Importantly, switching works even when the interface is in direct contact with biological fluids and a buffered environment. The technology offers many applications such as zero fouling on demand, patterning or separation of proteins as well as controlled release of biologics in a physiological environment, showing high potential for future drug delivery in vivo.

Tuning the Thermoresponsive Behavior of Surface-Attached PNIPAM Networks: Varying the Crosslinker Content in SI-ATRP.

The synthesis and thermoresponsive properties of surface-attached poly(N-isopropylacrylamide)-co-N,N'-methylene bisacrylamide (PNIPAM-co-MBAM) networks are investigated. The networks are formed via SI-ARGET-ATRP ("grafting-from") on thiol-based initiator-functionalized gold films. This method is reliable, well controlled, fast, and applicable to patterned surfaces (e.g., nanopores) for networks with dry thicknesses >20 nm. Surface-attached PNIPAM-co-MBAM gels are swollen below their volume phase transition temperature but above collapse without complete expulsion of water (retain ∼50 vol %). The swelling/collapse transition is studied using complementary SPR and QCMD techniques. The ratio between swollen and collapsed heights characterizes the thermoresponsive behavior and is shown to not depend on network height but to vary with MBAM content. The higher the proportion of the crosslinker, the lower the magnitude of the phase transition, until all responsiveness is lost at 5 mol % MBAM. The temperature range of the transition is broadened for more crosslinked PNIPAM-co-MBAM gels but remains centered around 32 °C. Upon reswelling, less crosslinked networks display sharp transitions, while for those containing ≥3 mol % MBAM, transitions remain broad. This tunable behavior persists for gels on nanostructured gold surfaces. Investigating PNIPAM-co-MBAM networks on gold plasmonic nanowell arrays is a starting point for expanding their scope as thermo-controlled nanoactuators.

Large Changes in Protonation of Weak Polyelectrolyte Brushes with Salt Concentration-Implications for Protein Immobilization.

We report for the first time that the protonation behavior of weak polyelectrolyte brushes depends very strongly on ionic strength. The pKa changes by one pH step per order of magnitude in salt concentration. For low salt concentrations (∼1 mM), a very high pH is required to deprotonate a polyacidic brush and a very low pH is required to protonate a polybasic brush. This has major consequences for interactions with other macromolecules, as the brushes are actually almost fully neutral when believed to be charged. We propose that many previous studies on electrostatic interactions between polyelectrolytes and proteins have, in fact, looked at other types of intermolecular forces, in particular, hydrophobic interactions and hydrogen bonds.

Ring-Opening Polymerisation of Low-Strain Nickelocenophanes: Synthesis and Magnetic Properties of Polynickelocenes with Carbon and Silicon Main Chain Spacers.

Polymetallocenes based on ferrocene, and to a lesser extent cobaltocene, have been well-studied, whereas analogous systems based on nickelocene are virtually unexplored. It has been previously shown that poly(nickelocenylpropylene) [Ni(η5 -C5 H4 )2 (CH2 )3 ]n is formed as a mixture of cyclic (6x ) and linear (7) components by the reversible ring-opening polymerisation (ROP) of tricarba[3]nickelocenophane [Ni(η5 -C5 H4 )2 (CH2 )3 ] (5). Herein the generality of this approach to main-chain polynickelocenes is demonstrated and the ROP of tetracarba[4]nickelocenophane [Ni(η5 -C5 H4 )2 (CH2 )4 ] (8), and disila[2]nickelocenophane [Ni(η5 -C5 H4 )2 (SiMe2 )2 ] (12) is described, to yield predominantly insoluble homopolymers poly(nickelocenylbutylene) [Ni(η5 -C5 H4 )2 (CH2 )4 ]n (13) and poly(tetramethyldisilylnickelocene) [Ni(η5 -C5 H4 )2 (SiMe2 )2 ]n (14), respectively. The ROP of 8 and 12 was also found to be reversible at elevated temperature. To access soluble high molar mass materials, copolymerisations of 5, 8, and 12 were performed. Superconducting quantum interference device (SQUID) magnetometry measurements of 13 and 14 indicated that these homopolymers behave as simple paramagnets at temperatures greater than 50 K, with significant antiferromagnetic coupling that is notably larger in carbon-bridged 6x /7 and 13 compared to the disilyl-bridged 14. However, the behaviour of these polynickelocenes deviates substantially from the Curie-Weiss law at low temperatures due to considerable zero-field splitting.

Role of torsional strain in the ring-opening polymerisation of low strain [n]nickelocenophanes.

Ring-opening polymerisation (ROP) of strained [1]- and [2]metallocenophanes and related species is well-established, and the monomer ring-strain is manifest in a substantial tilting of the cyclopentadienyl ligands, giving α angles of ∼14-32°. Surprisingly, tetracarba[4]nickelocenophane [Ni(η5-C5H4)2(CH2)4] (2) undergoes ROP (pyridine, 20 °C, 5 days) to give primarily insoluble poly(nickelocenylbutylene) [Ni(η5-C5H4)2(CH2)4] n (12), despite the lack of significant ring-tilt. The exoenthalpic nature of the ROP was confirmed by DFT calculations involving the cyclic precursor and model oligomers (ΔH0ROP = -14 ± 2 kJ mol-1), and is proposed to be a consequence of torsional strain present in the ansa bridge of 2. The similarly untilted disila-2-oxa[3]nickelocenophanes [Ni(η5-C5H4)2(SiMe2)2O] (13) and [Ni(η5-C5H4)2(SiMePh)2O] (14) were found to lack similar torsional strain and to be resistant to ROP under the same conditions. In contrast, 1-methyltricarba[3]nickelocenophane {Ni(η5-C5H4)2(CH2)2[CH(CH3)]} (15) with a significant tilt angle (α ∼ 16°) was found to undergo ROP to give soluble polymer {Ni(η5-C5H4)2(CH2)2[CH(CH3)]} n (18). The reversibility of the process in this case allowed for the effects of temperature and reaction concentration on the monomer-polymer equilibrium to be explored and thereby thermodynamic data to be elucidated (ΔH0ROP = -8.9 kJ mol-1, ΔG0ROP = -3.1 kJ mol-1). Compared to the previously described ROP of the unsubstituted analogue [Ni(η5-C5H4)2(CH2)3] (1) (ΔH0ROP = -10 kJ mol-1, ΔG0ROP = -4.0 kJ mol-1), the presence of the additional methyl substituent in the ansa bridge appears to marginally disfavour ROP and leads to a corresponding decrease in the equilibrium polymer yield.

New reactivity at the silicon bridge in sila[1]ferrocenophanes.

We describe two new types of reactivity involving silicon-bridged [1]ferrocenophanes. In an attempt to form a [1]ferrocenophane with a bridging silyl cation, the reaction of sila[1]ferrocenophane [Fe(η-C5H4)2Si(H)TMP] (12) (TMP = 2,2,6,6-tetramethylpiperidyl) towards the hydride-abstraction reagent trityl tetrakis(pentafluorophenyl)borate ([CPh3][B(C6F5)4]) was explored. This yielded the unusual dinuclear species [Fe(η-C5H4)2Si(TMP·H)(η-C5H3)Fe(η-C5H4)Si(H)TMP][B(C6F5)4] [13][B(C6F5)4] in low yield. The formation of [13]+ is proposed to involve abstraction of hydride from the silicon bridge in 12 with subsequent C-H bond cleavage of a cyclopentadienyl group by the resulting electrophilic transient silyl cation intermediate. We also explored the reaction of dimethylsila[1]ferrocenophane [Fe(η-C5H4)2SiMe2] (1) with the Au(i) species AuCl(PMe3). This was found to result in addition of the Au-Cl bond across the Cpipso-Si bond to yield the ring-opened species [1'-(chlorodimethylsilyl)-ferrocenyl](trimethylphosphine)gold(i), [Fe(C5H4SiMe2Cl){C5H4Au(PMe3)}] (14). This represents the first example of ring-opening addition of a metallocenophane with a reagent possessing a transition metal-halogen bond.

Polyferrocenylsilanes: synthesis, properties, and applications.

This in-depth review covers progress in the area of polyferrocenylsilanes (PFS), a well-established, readily accessible class of main chain organosilicon metallopolymer consisting of alternating ferrocene and organosilane units. Soluble, high molar mass samples of these materials were first prepared in the early 1990s by ring-opening polymerisation (ROP) of silicon-bridged [1]ferrocenophanes (sila[1]ferrocenophanes). Thermal, transition metal-catalysed, and also two different living anionic ROP methodologies have been developed: the latter permit access to controlled polymer architectures, such as monodisperse PFS homopolymers and block copolymers. Depending on the substituents, PFS homopolymers can be amorphous or crystalline, and soluble in organic solvents or aqueous media. PFS materials have attracted widespread attention as high refractive index materials, electroactuated redox-active gels, fibres, films, and nanoporous membranes, as precursors to nanostructured magnetic ceramics, and as etch resists to plasmas and other radiation. PFS block copolymers form phase-separated iron-rich, redox-active and preceramic nanodomains in the solid state with applications in nanolithography, nanotemplating, and nanocatalysis. In selective solvents functional micelles with core-shell structures are formed. Block copolymers with a crystallisable PFS core-forming block were the first to be found to undergo "living crystallisation-driven self-assembly" in solution, a controlled method of assembling block copolymers into 1D or 2D structures that resembles a living covalent polymerisation, but on a longer length scale of 10 nm-10 µm.